• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

talkback hookup


Those are nice little AM bases and will tune up very nicely. what you can do for talkback is this (beings there no P.A. jack) , Take a 100 ohm resistor and attach it to the ground side of the front firing speaker on that unit to the boards ground, Walla !! you have talkback !! (you can add a little wire to it if it doesn't reach the board) high ohms for less or lower ohms for more talkback volume , there's other ways to do it but that should work in a pinch.
rstrc495nr6.jpg
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.