• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Thinking about buying a Uniden 980SSB Radio???

Semi-Truck

BANNED
Dec 10, 2013
7
0
0
I'm thinking about buying this for a secondary Radio
to My Cobra 2000 GTL I Plan on using it mainly for the Scan
feature. Little Trasmitting
To use more or less as a CB Band-Scope if you will...LOL...
It will be hooked up to my Solarcon A-99 with a Duplexor.

Does it look like a good Radio for My indended Purporse????

Uniden 980 SSB CB Radio | Right Channel Radios
 

m42duster, Will a Duplexor decrease my range any?
Or will Range stay the same?
Anything I should know about using a duplexor?
 
No noticeable difference.

BTW, there are other vendors with cheaper prices on the 980.

I would add that you should buy the radio from a place that does quality tech work. This way the radio gets tuned & aligned correctly and then shipped once and your done. This guy has many options for the new Uniden radio's.

Custom CB radios
 
I'm thinking about buying this for a secondary Radio
to My Cobra 2000 GTL I Plan on using it mainly for the Scan
feature. Little Trasmitting
To use more or less as a CB Band-Scope if you will...LOL...
It will be hooked up to my Solarcon A-99 with a Duplexor.

Does it look like a good Radio for My indended Purporse????

Uniden 980 SSB CB Radio | Right Channel Radios
local here has one .runs it both mobile and base does quite well with it
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.