Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Tips on installing a magna 400

  • Thread starter Thread starter 439DownSouth
  • Start date Start date
4

439DownSouth

Guest
Order a Magnaforce 400, 130 amp alt,Jeep grand Cherokee, I ran ground straps from underside of body to the frame (wire brushed till bare medal) and from Neg. on the batt. to the body again. (Would a ground wire from the Neg. terminal to the frame help???).

I knew a guy years ago that had his set-up grounded real well in a Bronco 2, but i don't remember exactly what he did. Sounded super good though.



Any tips from ya'll


The kind country boy 439 Alabama</p>Edited by: <A HREF=http://pub86.ezboard.com/u439downsouth.showPublicProfile?language=EN>439DownSouth</A> at: 9/11/02 1:14:52 am
 

Order a Magnaforce 400, 130 amp alt,Jeep grand Cherokee, I ran ground straps from underside of body to the frame (wire brushed till bare medal) and from Neg. on the batt. to the body again. (Would a ground wire from the Neg. terminal to the frame help???).

I knew a guy years ago that had his set-up grounded real well in a Bronco 2, but i don't remember exactly what he did. Sounded super good though.



Any tips from ya'll


The kind country boy 439 Alabama</p>Edited by: <A HREF=http://pub86.ezboard.com/u439downsouth.showPublicProfile?language=EN>439DownSouth</A> at: 9/11/02 1:14:52 am
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom