Titan roadpro part ???

[Sonwatcher]

The little center button you push to change freq came loose. Is there anyplace I can get this part ? It's the whole essembly of little buttons, their all in one unit.



Thanks,

Ron


</p>

 

[2IR473]

Hello Ron,



I would try contacting RF Limited and see if they have parts available, since the Titan Road Pro is the same as the Magnum series of radios (with only one final).



www.rflimited.com/Contact...actrfl.HTM



Also, you might try Bob @

www.bobscb.com/bobs_cb.htm

and see if he could help out.





Happy Thanksgiving and good luck.



Paul










<span style="color:maroon;">CDX 8412</span>

<span style="color:maroon;">2 International Radio 473</span>

</p>

 

[Sonwatcher]

Thanks Slim !

So far I've tried the contacts people gave me and no results yet.



Ron

CDX-897

God bless you all !</p>Edited by: <A HREF=http://pub86.ezboard.com/bworldwidecbradioclub.showUserPublicProfile?gid=sonwatcher@worldwidecbradioclub>Sonwatcher</A> at: 12/1/02 8:49:04 pm

 

[Sonwatcher]

Will do Slim.

Thanks ! <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/smile.gif ALT="">

CDX-897

God bless you all !</p>

 

[Peddler 356]

Try this;



RF Limited/ Magnum International

17725 NE 65th st.

Redmond, Washington 98052



I don,t have a phone #



OR;

keithele@csrlink.net



this is where I bought mine.



I hope this helps.

Jim <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/pimp.gif ALT=":hat">


The Peddler............

</p>

 

[Sonwatcher]

Well Slim it was a galant try ! But my buttons are totally in different places for some reason. Must be newer version. Thanks a lot for your help !!!



Ron

CDX-897

God bless you all !</p>

 

[Sonwatcher]

Well we tried ! <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/smile.gif ALT="">



Thanks !

CDX-897

God bless you all !</p>

 

[Sonwatcher]

Thanks Everyone !

RF-Limited got back to me and has the part.



You've all been a great help !



Ron

CDX-897

God bless you all !</p>

 

[Sonwatcher]

Ozark,

They're just held together with thin plastic strips about 1/4 " or so long. That's what happened to mine,the cold. Rf-Limited has them( they're all part of one unit } for around $10 plus shipping. I haven't sent for mine yet as I have the button placed in it's hole with scotch tape over it <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/happy.gif ALT=""> . It's not hard to replace. Just remember that after you take the screws out you MUST unscrew the outer nut that holds the mic connector to the face of the radio. If you don't and pull on the face you could break it. Then there are a couple of pull tabs you have to bend back after the face plate is removed. Then I think only 4 screws hold a guard over the button assembly. That's it ! Hope this helps <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/smile.gif ALT="">



Ron

CDX-897

God bless you all !</p>

 

[Sonwatcher]

The button assembly is $10.00 + shipping. If you would like to order please call 1-877-624-6869



I asked for the button assembly for a Magnum 257 as it is the same.<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/smile.gif ALT="">



Sonwatcher

CDX-897

God bless you all !</p>

 

[Sonwatcher]

You are VERY Welcome ! Glad to help !



Sonwatcher

CDX-897

God bless you all !</p>