Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

toolbox mount

Moleculo

Moleculo

Ham Radio Nerd
Apr 14, 2002
9,321
2,012
383
The toolbox is bolted down to the bed, right? If so, you shouldn't have ground issues. Is the toolbox painted? If so you may have to scrape some away where the mount goes.


</p>
 

Here's mine...

DSC00051.jpg



Growling_Dog.gif


Big Dog

27mhz.gif
</p>
 
I'm going to mount my 10k on my toolbox and was just wandering if you guys had any tips on making it perform better on the toolbox, like does it need to be grounded or such<img src=http://www.wwdx.org/smilies/posticon62.gif ALT=":62">

<img src=http://www.wwdx.org/smilies/posticon56.gif ALT=":56">


</p>
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom