You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Reply to thread

Message

I grounded the s3c wafer 5th connection to short the alc and compression. to test transmit i pushed the mic button and the ground wire clip end that was grounded to the chassis snapped and sparked there are two white/red wires soldered to terminal 5. but im confused because the schematic shows a white/blue wire should be on #5 it is on terminal #9 s3c.

[QUOTE="klj2497, post: 674195, member: 49035"] I grounded the s3c wafer 5th connection to short the alc and compression. to test transmit i pushed the mic button and the ground wire clip end that was grounded to the chassis snapped and sparked there are two white/red wires soldered to terminal 5. but im confused because the schematic shows a white/blue wire should be on #5 it is on terminal #9 s3c. [/QUOTE]

Top Bottom