Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Turner plus 3 mic.

B

Bartman

Member
Oct 25, 2011
6
0
11
55
Need help with wire schematic.turner plus 3 silver faced blue,black,yellow,red,shield color wires to a ranger ar 3500 with 8 pin mic.I can not find any info on the net,figured someone here could help,please.thanks.
 

Do you need the schematic of the amplifier circuit board or do you want to know how to wire to your radio?

I traced out the board 20+ years ago but no idea where it may have gone. Rest assured the active components are long ago obsolete and NLA...

The wire colors are somewhat irrelevant. Whatever wire the shield wraps around is the mic audio line. Use a multimeter to see what wires connect together during transmit and then what are connected during receive. From there you need to determine how the AR3500 is wired.

Figure out how both ends work and connect A to B. Should be easy enough...
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom