Turner Plus Three Desk Mic wiring for an RCI 2980 4 pin...

[danmcclain]

Looking to wire my Turner Plus Three for use on an RCI 2980. Anyone got the color code and 4 pin layout for an RCI 2980 Base Station? Thanks, Dan

 

[guitar_199]

I just looked up both.... the RCI 2980 pin assignment is as follows

1 - Audio Shield
2 - Mic Audio
3 - XMT control
4 - RCV control

Now, the color code I see on the Turner Plus 3 mic is....

Mic Audio - WHITE
Mic Shield/Gnd - SHIELD wire
XMT - BLACK
RCV - RED

So I would say

SHIELD wire to pin 1
WHITE to pin 2
BLACK to pin 3
RED to pin 4

should do it.

 

[danmcclain]

Thank you guitar_199 for your prompt reply. I will be able to use my Turner Plus Three mic now...

 

[guitar_199]

Dan, for the favors you have done for me..... the pleasure was mine. Good luck on getting that rolling.

 

[danmcclain]

Thanks again, helping each other is what its all about.... Dan

 

[danmcclain]

guitar_199...Followed the wiring instructions you provided, instead of a white wire there was a yellow wire, so soldered all the wires where they go and that left one pin for the yellow wire. A successful job...the Turner Plus Three is working perfectly...Thanks again. Now have a Turner Super Sidewinder I need to wire to a radio, just haven't decided which one yet...

 

[Smokinone]

I really like the Turner mics, all flavors

 

[danmcclain]

I really like the Turner mics, all flavors

So do I. Have a Turner Super Sidekick also, haven't decided which radio to hook it to yet...lol

 

[guitar_199]

Glad to hear it Dan. Hope you get many a QSO with that mic.

guitar_199...Followed the wiring instructions you provided, instead of a white wire there was a yellow wire, so soldered all the wires where they go and that left one pin for the yellow wire. A successful job...the Turner Plus Three is working perfectly...Thanks again. Now have a Turner Super Sidewinder I need to wire to a radio, just haven't decided which one yet...