Sidebar Sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Unhacking a Galaxy 949

buickid said:
Okay, found a 945 in a parts radio, as well as a clip to put back to the test point. There is a wire going from the TP8 solder points to the B+ point on the board... I assume that was done when the TP8 point was removed, to supply whatever feeds off the jumper board. Since I'm putting TP8 back, I should remove that wire, correct?
Click to expand...

yes that is part of the npc/rc mod.
 

dxChat
Help Users
  • No one is chatting at the moment.


      Top Bottom
      Back