You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Reply to thread

Message

Gamma match to a grounded tower is said to work okay. Just make sure you bond each tower section to the one above it. A piece of stainless sheet on the tower leg above and another one below where they join gets a copper strap across the joint. A stainless worm clamp keeps each end attached. The layer of stainless keeps the copper from getting chemically active with the zinc surface of the tower leg.

73

[QUOTE="nomadradio, post: 826021, member: 22"] Gamma match to a grounded tower is said to work okay. Just make sure you bond each tower section to the one above it. A piece of stainless sheet on the tower leg above and another one below where they join gets a copper strap across the joint. A stainless worm clamp keeps each end attached. The layer of stainless keeps the copper from getting chemically active with the zinc surface of the tower leg. 73 [/QUOTE]

Top Bottom