You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Reply to thread

Message

Sounds like you have R1 and R2 reversed and you won't see much (if any) voltage drop until you start to draw current. Remember that V= I²R and if I=zero then the voltage drop will be zero. Either that or the circuit draws a LOT more current than you think.

[QUOTE="Captain Kilowatt, post: 151783, member: 39"] Sounds like you have R1 and R2 reversed and you won't see much (if any) voltage drop until you start to draw current. Remember that V= I²R and if I=zero then the voltage drop will be zero. Either that or the circuit draws a LOT more current than you think. [/QUOTE]

Top Bottom