My Dearest! I have a Vertex VXR-7000 repeater it accepts programming from 150mhz, I would use on the amateur radio frequency 145.390 (-600khz.)
Moises C.
73"
by
PY2HR
Moises C.
73"
by
PY2HR
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
VXR-7000 Vertex Frequency Expansion
- Thread starter Moises PY2HR
- Start date
BJ radionut
Supporting Member and 6m addict
https://www.worldwidedx.com/threads/frequency-expansion-for-vxr-7000.97138/
In command prompt, type. ce27b -f
when prompted for the password, type: ansho-bango
hit enter.
You are working the software with manufactures access right!
You can change the lower and upper frequency ends, remember to perform tuning before using the repeater.
73
Jeff
http://www.repeater-builder.com/yvs/vxr-7000/vertex-ce27.pdf
In command prompt, type. ce27b -f
when prompted for the password, type: ansho-bango
hit enter.
You are working the software with manufactures access right!
You can change the lower and upper frequency ends, remember to perform tuning before using the repeater.
73
Jeff
http://www.repeater-builder.com/yvs/vxr-7000/vertex-ce27.pdf
- No one is chatting at the moment.
-
-
dxBot:63Sprint has left the room.
-
dxBot:kennyjames 0151 has left the room.
-
-
