I need an off the shelf mic pinned out for my Washington radio's for testing. Cant find pin out listed in ads for uniden radio's. Any budy knows would be great. Thanks everyone. Mac
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Washington mic
- Thread starter Mark Malcomb
- Start date
Mark,
For the 5 pin microphone (Uniden Washington with 8719 PLL) see the link below.
http://www.cbtricks.com/radios/uniden/washington_mb8719/graphics/uniden_washington_mb8719_sch.pdf
Bottom of the schematic about the middle of the page.
I read it as:
Audio-1
Shield-2
RX-3
Common-4
TX-5
I have a Cobra 139XLR (same or similar chassis as a Washington with an 858 PLL) with a 4 pin mike plug.
The link below shows the mike pin out as:
Shield-1
Audio-2
TX-3
RX-4
http://www.cbtricks.com/radios/cobra/139xlr/index.htm
Good Luck.
73
David
For the 5 pin microphone (Uniden Washington with 8719 PLL) see the link below.
http://www.cbtricks.com/radios/uniden/washington_mb8719/graphics/uniden_washington_mb8719_sch.pdf
Bottom of the schematic about the middle of the page.
I read it as:
Audio-1
Shield-2
RX-3
Common-4
TX-5
I have a Cobra 139XLR (same or similar chassis as a Washington with an 858 PLL) with a 4 pin mike plug.
The link below shows the mike pin out as:
Shield-1
Audio-2
TX-3
RX-4
http://www.cbtricks.com/radios/cobra/139xlr/index.htm
Good Luck.
73
David
