• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

What are the differences between the cobra 29ltd and the 29gtl?

Cable Guy

Growth must be chosen again and again.
I Support WorldwideDX.com!
Dec 29, 2010
1,221
1,283
173
413-West Tennessee
I know Howard Sam's co. didn't release the 29ltd as a photofacts but the 29gtl has been, at least I found the schematic, and I was curious if the gtl schematic is close enough with minor circuit changes to use for the ltd. I could try to compare the blurry ltd schematic to the gtl but figured someone already has.
 

I know Howard Sam's co. didn't release the 29ltd as a photofacts but the 29gtl has been, at least I found the schematic, and I was curious if the gtl schematic is close enough with minor circuit changes to use for the ltd. I could try to compare the blurry ltd schematic to the gtl but figured someone already has.
The 29s were built in different locations pending on the year. Early models were built in Taiwan. The for 1 year and 1 year only the GTL was built in Hong Kong. Followed by the Philippine versions, which were arguably the best of them all. From there they were built in China, which is when the mic jack was moved to the front of the radio. As far as schematics go, I don't believe there was much of a difference until the China built. Which came with a different audio chip.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ COWBOYS:
    Denton GL 1000 ham amp comes on, but will not key up
  • @ COWBOYS:
    What can I do to make my Denton GLS 1000 amp to load ?
  • @ AudioShockwav:
    Try starting a new thread in the Amplifier section and asking the question, more people will see it to respond.
  • @ iw7ed:
    hello