• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

What is this?

Cable Guy

Growth must be chosen again and again.
I Support WorldwideDX.com!
Dec 29, 2010
1,194
1,246
173
413-West Tennessee
IMG_20250624_143333886_HDR.jpg
IMG_20250624_143917415_HDR.jpg
I found it inside an abused president Zachary t. Late model with the 2816c pll, same as a 89gtl so I have found. It has 2 power wires and 2 wires labeled TSW1 and TSW2. The TSW wires replaced a capacitor directly in front of the final, c4 I think.
IMG_20250624_143931832_HDR.jpg
Filth warning...
IMG_20250624_145241059~2.jpg
It was shrink wrapped and just kind of hanging around. Anyone know? I think I'm going to part this rig out as I'm tired of cleaning people's filth out of radios, and I was curious.
 

Thank you, it was likely added to increase rx to make up for a fault in the rx chain. Had horrible rx even with the amp inline and while checking it, L1 had no effect. Maybe the first rf amp or that coil is at fault, and I could repair it, but since it isn't the 858 version, and is am only, I can't see putting in the effort. It is probably the nastiest radio I have ever opened. I cringe whenever I touch it. But, it does have the original headphone jack which I think will work in my uniden Washington 8719 which has been missing it's jack since someone decided an expo switch would be better there. I disagreed vehemently.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.