• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • The Winners of the three Retevis radios 16 Anniversary giveaway are announced!! Click Here to find out if you won!

what's the scoop on Heil

ford074

Member
Apr 5, 2005
90
1
16
Iowa
Anybody use a microphone made by Heil? Do the stck up to the hype?


clublincoln.gif
</p>
 

I personaly have never run one but have talked to many stations that run them,either the HC-4 or HC-5, and you can tell almost the instant that someone calls you that they are running a Heil microphone.They seem to have a sound of their own and the sound is great.Many times I have asked if they are running a Heil and the response is usually "Well yes.How did you know?" I have a good ear for sound quality,I am a broadcast engineer,and I think that the Heil mics are really good.The only reason that I don't run one is that I took a more elaborate approach and use a D-104SE with an equalizer and outboard speech processor.



qrnsig.gif
Garth 9VE01 PE993 CDX993 Learn from others mistakes.You can not live long enough to make them all yourself.</p>
 
Thanks for the response. I've read that they are supposed to be an excellent unit. I am always looking for ways to make my set-up sound better/cleaner and I've seen these microphones in the magazines. I wasn't sure if they would live up to the advertisements claims or not.

I like my Turner+3B with my old HR-2510 ,but , I might start looking at the hamfests for a Heil if they are that good.

Are they difficult to wire up?




clublincoln.gif
</p>
 
Hey Jockey,

The 5 element is the good sounding one. The 4-element is designed to get you through the hash but not the sound of the 5-element. So if you're looking for good sound go for the 5. If you're wanting to just get through all the noise to be heard go with the 4.


sonwatchersig.gif


CDX_3.gif




God bless you all !



CDX-897

OT-897

WV-897

CM-2368

American Kangaroo-1897</p>
 
Justrod,

I put the HC-5 cartiridge in the sock mic on my Kenwood TS-50 and I get nothing but great reports on the audio. And that is out of a Dump truck.

73

fasteddy


</p>
 
No, he uses it when he's not runnin' barefoot !<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/roll.gif ALT=":rollin">


sonwatchersig.gif


CDX_3.gif




God bless you all !



CDX-897

OT-897

WV-897

CM-2368

American Kangaroo-1897</p>
 
Good info here guys. Now for a little information on preferences between the wide & narrow settings. Which setting do those of you who are using or have heard these in use prefer? I currently have a a MC-60 desk mic on a TS-430S. What would be involved in replacing the element in the MC-60 and would it really improve the audio on SSB of the TS-430S? I've never really looked at my MC-60 to determine how difficult it would be to get it apart to make this modification.



Thanks!!
smile.gif



Wayne C.

CDX-787

mobile/base

Magna Force 900

HR2600/Kenwood TS-430S

MR. COILY Single Coil/Wolf .64

D104M6B/MC-60 desk

Every man is a damn fool for at least 5 minutes every day; wisdom consists in not exceeding the limit.



educate-01sig.gif






</p>
 
<blockquote>Quote:<hr>But the Heil iCM for Icom's is a total rip-off.<hr></blockquote> Thanks for the info Dave. I've been looking for a mic for my IC-251 and I just had a funny feeling about the Heil's for Icoms. I tried a Turner +3 desk mic but if I turn it down low enough for good clean <span style="color:lime;">(actually GREAT sounding)</span>audio, It dosent drive the radio enough. If I turn up the mic gain to where it drives the radio to a full 10-12W PEP the audio is horriable. Since The older Icom's have the goofy pre-amp in the mic set up, I think I'll just find a mic. that was built for them. I've heard a few Icom SM-20's on the air and they sound really nice.


<hr />73, Mike KD5VHF@ARRL.net</p>
 
Ed,



Gigaparts has them in stock.<img src=http://users.joplin.com/dutch64804/posticon51.gif ALT=":51">



73's<img src=http://users.joplin.com/dutch64804/posticon62.gif ALT=":62">


Wayne C.

CDX-787

mobile/base

Magna Force 900

HR2600/Kenwood TS-430S

MR. COILY Single Coil/Wolf .64 ground plane

D104M6B/MC-60 desk

Every man is a damn fool for at least 5 minutes every day; wisdom consists in not exceeding the limit.



educate-01sig.gif






</p>Edited by: <A HREF=http://p067.ezboard.com/bworldwidecbradioclub.showUserPublicProfile?gid=eduk8tr>EDUK8TR</A> at: 9/23/04 11:43 am
 

dxChat
Help Users
  • No one is chatting at the moment.