Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Wilson 2000 Trucker install Questions

  • Thread starter Thread starter seawolf18
  • Start date Start date
S

seawolf18

Guest
I have a wilson 2000 trucker I want to install on my car. I bought it from a friend, and it is currently on a mag mount. I was thinking of installing a crack mount between the body of the car and the trunk lid on the drivers side. Would the antenna perform better mounted this way, or should I just leave it on the mag mount?


</p>Edited by: <A HREF=http://p067.ezboard.com/bworldwidecbradioclub.showUserPublicProfile?gid=seawolf18>seawolf18</A> at: 10/29/04 3:53 pm
 

Re: Wilson 2000 Trucker instal Questions

It will perform the best in the center of your vehicle on top of the car. It will work on the trunk lip mount, too, but you asked which way is better. They make permanent mounts for the center, if you don't mind drilling a hole. Then you don't have to worry about having the cable exposed all the time and the magnet moving around.



Moleculo


</p>
 
  • Like
Reactions: Groundhog KSS-2012

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom