H
honkytonkman593
Guest
i need to know how to wire the d 104 to a icom 706 mobile radio which has the module plug. any info helpful
</p>
</p>
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
T
Tumbleweed
Guest
It uses the same 8 pin modular that's used for computer networks. You can get those at Lowe's and the crimping tool. On Astatics web site, download the full mic wiring in Adobe pdf format and they have the 706 listed. You use 4,5,6 & 7 pin of the modular.
Red=4; Shield=5; White=6; Blue=7. A little tip, get some small heat shrink tubing for the ground/shield wire. That will help it guide and make better contact with the contacts when you crimp it.
BTW.... I've tried the 104 and the 575 and they don't sound very good on the 706 I've got. The range is so much different on the Icom's.
Hope this helps.
CDX-350
2AK3350
</p>
Red=4; Shield=5; White=6; Blue=7. A little tip, get some small heat shrink tubing for the ground/shield wire. That will help it guide and make better contact with the contacts when you crimp it.
BTW.... I've tried the 104 and the 575 and they don't sound very good on the 706 I've got. The range is so much different on the Icom's.
Hope this helps.
CDX-350
2AK3350