Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

would it be possible

  • Thread starter Thread starter ozarkjeep
  • Start date Start date
O

ozarkjeep

Guest
to make the 6th digit on the freq display change when the clarifier is turned?



My rit is unlocked and moved both tx/rx but the display always stays the same.



probably more trouble than its worth, im just curious.






</p>
 

to make the 6th digit on the freq display change when the clarifier is turned?



My rit is unlocked and moved both tx/rx but the display always stays the same.



probably more trouble than its worth, im just curious.






</p>
 
The Frequency Display on the Hr2510/2600/Lincoln radios, is drivin by the CPU, so it really is not a frequency counter that will track the RIT. Having someone wire in a external frequency counter would be the only way I can think of.



73

Jeff


CDX 339

RadioActive



20031128_1300_eit_171.gif


YAESU_150w.jpg
</p>
 
The Frequency Display on the Hr2510/2600/Lincoln radios, is drivin by the CPU, so it really is not a frequency counter that will track the RIT. Having someone wire in a external frequency counter would be the only way I can think of.



73

Jeff


CDX 339

RadioActive



20031128_1300_eit_171.gif


YAESU_150w.jpg
</p>
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom