Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Wouxun KG-UV3D Software Questions

K

kj4bgq

Member
Jan 9, 2011
1
0
11
67
Does anyone have experience programming the Wouxun KG-UV3D via software? Specifically, I want to know what is the purpose of the Frequency Mode, (A & B), under the Optional Features menu. Are the settings channel specific or band specific? If I program via the main page, do I even need to change the settings for the A & B modes?

KJ4BGQ
:bored:
 

kj4bgq said:
Does anyone have experience programming the Wouxun KG-UV3D via software? Specifically, I want to know what is the purpose of the Frequency Mode, (A & B), under the Optional Features menu. Are the settings channel specific or band specific? If I program via the main page, do I even need to change the settings for the A & B modes?

KJ4BGQ
:bored:
Click to expand...

Set "Channel Display Way" the way you want it... AND set the "Step Frequency" to that appropriat frequency steps.. say 5 khz, otherwise when you upload a frequency into memory, you may get an "out of range error"
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom