-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
-
A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!
Wouxun KG-UVD1P Software Mod
- Thread starter Moleculo
- Start date
And that one did the trick! Thanks mate, now I can go back to the fun of deciphering the Wouxun manual 
I must say that for the money these little jiggers are amazing. One hell of a lot of radio for very little investment. It makes you wonder about the cost of the SRP-9100s that these will be replacing in a lot of cases around here. I bet they don't cost all that much more to make.
I must say that for the money these little jiggers are amazing. One hell of a lot of radio for very little investment. It makes you wonder about the cost of the SRP-9100s that these will be replacing in a lot of cases around here. I bet they don't cost all that much more to make.
I opened up the band limits on my Wouxun with no problems. However, I was wondering is there a way to program the channels/frequencies so the unit will not transmit on a channel?
For example I have the local WX freq. 162.550 mHz programmed into the radio and I don't want to say sit on the HT and irreverently transmit on 162.550 and have the FBI come knocking on my door a few days later.
For example I have the local WX freq. 162.550 mHz programmed into the radio and I don't want to say sit on the HT and irreverently transmit on 162.550 and have the FBI come knocking on my door a few days later.
Program in an odd split and have the TX frequency either outside the range it will transmit on in which case it will simply display an error or program in an odd simplex frequency like 146.555 in which case it will simply transmit with very limited range inside the ham band. Some radios you can program the power level as well in which case set it at the lowest possible setting.
I use the software for my kg-uv6d and on frequencies that I am only monitoring, I leave the transmit portion blank. ie only enter frequency on the receive. This has to be done from the software and then download to the HT as far as I know.
hello everyone.. i have a quick question for u guys.. i own 2 Wouxun KG-UVD1P.. 1 with s/n:I10-xxxx, the other with s/n:K12-xxxx..
the problem i'm facing now is that i could unlock the I10 set with the software no problem.. but when i tried with the other (K12), it reads an unusual band range (see attachment)..
i could not write the new frequencies to the K12 set because it would say 'connection failure'.. after some tries it will say 'write successful' but nothing's changed on the set... i've searched everywhere for the solution but to no avail....
are the new sets now locked?
the problem i'm facing now is that i could unlock the I10 set with the software no problem.. but when i tried with the other (K12), it reads an unusual band range (see attachment)..
i could not write the new frequencies to the K12 set because it would say 'connection failure'.. after some tries it will say 'write successful' but nothing's changed on the set... i've searched everywhere for the solution but to no avail....
are the new sets now locked?
It's a serial port issue - you have to figure out which port the software is expecting and which one your PC is configured for. Once you get that lined up, you'll be able to connect.
Frequency change did not work
i got the wouxun KG-UVD1P, with a range of 350-470. i tryed to change it to 420-520. even though the software work, the radio still does not rx or tx out off the range that it originally had, any idea what could be the problem?
i got the wouxun KG-UVD1P, with a range of 350-470. i tryed to change it to 420-520. even though the software work, the radio still does not rx or tx out off the range that it originally had, any idea what could be the problem?
Nope, can't be done. The radio will only receive 136-174 MHz and FM radio 76-108 MHz. You are out of luck.
Yep, that is what I was afraid of, but figured it was worth asking. Thanks for your reply!
having tried to unlock my wouxun i just get reports saying out of range can some body please tell me what im doing wrong