• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Retailer with lots of cool stuff

Highlander_821

Amour d'Ecosse
Apr 2, 2005
1,107
40
58
Central IL
I was shopping around for antenna building supplies and ran across this outfit:

http://www.buxcomm.com/

They carry lots of antenna supplies like rope, wire, various feedlines, insulators, etc. All sorts of other stuff too, like mics, jumpers, baluns, etc.

Also, The "Rascal" interface looks like an effective and affordable Radio==Soundcard interface for PSK31, SSTV, RTTY, etc. They seem to have it available in many different cable configs for many radios.

Check them out.
 
Last edited:

I was shopping around for antenna building supplies and ran across this outfit:

http://www.buxcomm.com/

They carry lots of antenna supplies like rope, wire, various feedlines, insulators, etc. All sorts of other stuff too, like mics, jumpers, baluns, etc.

Also, The "Rascal" interface looks like an effective and affordable Radio==Soundcard interface for PSK31, SSTV, RTTY, etc. They seem to have it available in many different cable configs for many radios.

Check them out.

He does have alot on his sight, he is a handfull to deal with, very "crabby old bastard" in my opinion :glare:

The Rascal does work good though
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.