• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

ARISSat-1 deployed and ready for use

Moleculo

Ham Radio Nerd
Apr 14, 2002
9,322
2,015
383
In case you missed it, ARISSat-1 was launched during a spacewalk from the International Space Station yesterday. With this bird, you will be able to receive it's telemetry, CW beacon and a SSTV transmission. It was supposed to also have a 2m/440 linear transponder, but the 440Mhz antenna came up missing. More information on how to work this bird can be found at: AMSAT - ARISSat How To
 

In case you missed it, ARISSat-1 was launched during a spacewalk from the International Space Station yesterday. With this bird, you will be able to receive it's telemetry, CW beacon and a SSTV transmission. It was supposed to also have a 2m/440 linear transponder, but the 440Mhz antenna came up missing. More information on how to work this bird can be found at: AMSAT - ARISSat How To

The missing antenna was disappointing, but considering it's only going to be up there for about 6 months and I think the primary mission was to monitor vacuum levels on its way back down. I did see one report that the transponder was working on the Amsat-BB but it was only one report, so unless there are more or KB1PVH or W1MSG post here about the transponder working, it probably doesn't.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.