• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

DSP 2232

doctor

Supporting Member
I Support WorldwideDX.com!
Aug 1, 2006
1,036
80
58
82
indiana
Got the DSP 2232 wrkng today, wrks great on PACTOR only mode I was interested in, using air mail for the program for it, so far looking good..tnx again ...
The airmail program is great guys for e-mail also, try it sometime..
DOCTOR
 

MLECULO
Do you remember what you adjusted for audio output on the tnc, my audio is way to low for a connect, rcvs great but the test stn said the audio is to low..is it the GAC or afsk adjustment?, using the ft 857d
DOCTOR
 
MLECULO
Do you remember what you adjusted for audio output on the tnc, my audio is way to low for a connect, rcvs great but the test stn said the audio is to low..is it the GAC or afsk adjustment?, using the ft 857d
DOCTOR

I don't remember because it's been a few years since I used it. I seem to remember that the adjustment was in the manual, though?
 
DSP 232/PACTOR

I got it working and connecting, it was the center frequency in airmail which was wrong, now all OK...
DOCTOR/795
 
What is one of these units worth? I found one and have no need for it. Thinking of selling it, but no idea of value.
 
DSP2232

If it has the upgrade to version 7 which does PACTOR $60 and up if it doesn't back to the dust bin.
DOCTOR 795
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.