• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Got me another CB

This CB has the Cybernet chassis with the "famous" PLLO2A chip! :thumbup:

Capable of many channels above and below the "Class D" 40 channels.... very common chassis of the 1970s in both 23 and 40 versions. AM is more common than SSB and HAMs make use of them for 10 meter conversions. :thumbup1:
Stock is mundane but it can be brought up, needs a good mic but don't try to "pry" too many watts. Band width of the rig is sort of narrow so if you are below do not expect much above 40! And vicy versa! :blink:

73 mechanic

Post some pics of the others!
 
Post some pics of the others!

No problem. I don't know that this one is worth mentioning....but I also acquired this Midland 77-106. I wonder what this would be like if I were to add a nice 150 watt linear on the end of it...?
 

Attachments

  • Midland 77-106 001.jpg
    Midland 77-106 001.jpg
    123.5 KB · Views: 3
  • Midland 77-106 002.jpg
    Midland 77-106 002.jpg
    137.6 KB · Views: 3
  • Midland 77-106 003.jpg
    Midland 77-106 003.jpg
    174 KB · Views: 3
I also acquired this K40 trunk mount from my friend. You think it looks out of place on the car?
 

Attachments

  • K40 on Buick 001.jpg
    K40 on Buick 001.jpg
    144.9 KB · Views: 3
  • K40 on Buick 003.jpg
    K40 on Buick 003.jpg
    112.9 KB · Views: 3
  • K40 on Buick 002.jpg
    K40 on Buick 002.jpg
    128.3 KB · Views: 3

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.