You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
WANTED PEARCE SIMPSON SIMBA 3 PIN DESK MIC
- Thread starter darticus
- Start date
If that mic uses a quarter inch stereo plug, wiring is simple. The short contact is the push to talk lead (most likely red), the next longest is the audio (white), and the very long one is ground (shield). Might have to solder the black along with the shield to that long contact.
Got it! Thanks Ron
If that mic uses a quarter inch stereo plug, wiring is simple. The short contact is the push to talk lead (most likely red), the next longest is the audio (white), and the very long one is ground (shield). Might have to solder the black along with the shield to that long contact.
dxChat
- No one is chatting at the moment.
-
-
-
-
@ AudioShockwav:Try starting a new thread in the Amplifier section and asking the question, more people will see it to respond.
-