You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
WANTED PEARCE SIMPSON SIMBA 3 PIN DESK MIC
- Thread starter darticus
- Start date
If that mic uses a quarter inch stereo plug, wiring is simple. The short contact is the push to talk lead (most likely red), the next longest is the audio (white), and the very long one is ground (shield). Might have to solder the black along with the shield to that long contact.
Got it! Thanks Ron
If that mic uses a quarter inch stereo plug, wiring is simple. The short contact is the push to talk lead (most likely red), the next longest is the audio (white), and the very long one is ground (shield). Might have to solder the black along with the shield to that long contact.
dxChat
- No one is chatting at the moment.
-
-
@ heartbreaker3473:Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
-
@ AudioShockwav:Wes, it's better if you start a thread on the main forum, more people are going to see your question.
-
-
@ heartbreaker3473:I put it in the general disscution help area and started a new thread. Thank you for letting me know.