• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

73's or just 73?


ok,.............. so is it: 73 (0ne word "seventy-three")

or 7 3 (two words: "seven" "three') ^^ ab v c^^^^ ab v c^^^^ ab v c^^

Historically, it's two words. Easily recognizable by the landline (American Morse) telegraphers. There was no "72", or "71", or "74".

Nor, AFAIK, was there anything like "87" or "89"...

Although a good female friend of mine (we both used to play in the Bremerton Symphony. She was principal bass, and I was principal percussion). Anyway, her dad had been a ham, and when I casually told her "88" after a rehearsal, she told me that she didn't feel comfortable (what with me being happily married) with my using that. I said, well how about "44". She liked that! When she sent us the invitation to her wedding, the little handwritten note ended with "44 KJ".
 
WTF??

Corrected for saying 73's??

I usually sign with

" (insert op call sign) Thank you for the contact, look forward to working you again around the bands. Good DX and 73's from ( insert call sign)."

Never ever has any one corrected the saying of 73's
 
73's worked for Hiram.
 

Attachments

  • nms_1231[1].jpg
    nms_1231[1].jpg
    60.7 KB · Views: 317
  • Like
Reactions: 1 person

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.