I've recently dropped my 2950 dx , and the on /off switch and mode selector are twisted can anyone recommend a repair facility , I've already been to one radio repair shop in San Antonio Texas, clays radio shop and he has told the parts are hard to obtain ... I'm assuming I would need new pins as when I take the caps off the pins are bent inside,so would it be possible to send it to a good repair shop as I don't know of any of hand or to ranger if they do repairs the radio is about 3 years old and might also need to be checked if is on frequency any advice would be greatly apreciated .. also wanted to point out I live in Western Canada but haul produce from Canada anywhere in the USA so i might not be always travelling the same route ....
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
-
A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!
Ranger Rci 2950 Dx
- Thread starter skip searcher
- Start date
Ok thanks I'm not sure if that's a big job time wise but I would rather get it done while I wait if possible , I shall check out those links thanks .
Radio Shop Supply in Ramona CA. Ranger factory repair shop and they have done excellent work for me on a number of radios
Ok thanks I'm gonna contact a couple of different stores and get a rough estimate of the repairs ,
I have previously used DTB, and would again, but have been looking for a good place on the west coast of the USA that would do a good tune (+align/expand) on RCI 29xx series radios.
Would you recommend them for this?
Do they have a walk-in shop, or online only? Do they service vintage radios/amp as well? Trying to gauge the technicians range of experience.
73's
Last edited: