Have an used alinco separation cable for the Alinco DXSR8T. I believe it will also work with the DXSR9.
Item is in great shape.
$40 shipped CONUS only.
Item is in great shape.
$40 shipped CONUS only.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
FS: Alinco EDS-17 Remote Separation Cable
- Thread starter Mudfoot
- Start date
RatsoW8
Supporting Member, W9WDX ARC Member - WD8T
I just cut the 15 or so wires on that 6" multi jumper with the two long flat connectors and inserted a 15 foot long 25 conductor cable on my dx70 with a dab of solder and heat shrink each time till done. Took a couple hours to do a neat job if I remember right. That was 10 years ago and the seperation kits were hard to find even then.
Sorry to hijack the thread - good luck with the sale and at least this is a bump...
I've owned 3 DX-70's. Still one of my favorite rigs. Only thing that bothered me was the weak, delicate design of the remote cable.