Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

142 information help

kopcicle

kopcicle

Sr. Member
Feb 17, 2016
2,218
3,674
273
Located in Sam's #219 is the Cobra 142 GTL PhotoFact . Does anyone have a digital copy? I seem to have lost my hard copy and obliterated my digital copy. I was attempting to help Kaos and couldn't find my information.
Sad part is that I had 20+ years of modifications and notes attached to both the hard and digital copies :-( .
 

I have never had the 142 manual my self but did use the TRC-450 mobile radio for the alignments and the 142 schematic off cbtricks site. I believe the washington base radio has the same adjustments as the 142 radio.
never did find the sams for this radio either. hope this helps some.
 
  • Like
Reactions: Robb
the President Washington version has the PC385 board in it also.. this is the version just before the Uniden Washington radio. I had to do some searching to find the sams on this one to verify it was the same.
 
look at the trc-450 service manual and see if it has the same lay out as the 142 radio. the trc-450 has a voltage chart.it is over on cbtricks.this is a mobile but will work for a base radio as far as the main board.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom