• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Can someone break down what a peak and tune is

Over clocked Electronics is the name of the shop the guy has an honest reputation Amongst drivers for doing a fair job and not high balling anyone , I called into Q5 on a couple of occasions he is upstairs in the truckstop an older guy possibly a ham radio operator by looking at the Equipment he had , it’s ok if your running up that way the shop in Gary is on a major east west interstate that carries a lot of truck traffic .


Thx. Pays to be sure.

.
 
I’ve done a bit of research which is in Gary Indiana at a truckstop the guy is highly recommend by drivers and base station operators has good reviews,
Lake Station? Shit, be careful around Gary. I used to stop there several times a week back in the 1990's and its a dangerous area. Dont wander far from the truck stop.
I wish my old radio peeps in Kalamazoo were still around.
 
Lake Station? Shit, be careful around Gary. I used to stop there several times a week back in the 1990's and its a dangerous area. Dont wander far from the truck stop.
I wish my old radio peeps in Kalamazoo were still around.
Who did you speak to in Kalamzoo Michigan I used to speak to lots up there also
 
  • Like
Reactions: Tokin
Lake Station? Shit, be careful around Gary. I used to stop there several times a week back in the 1990's and its a dangerous area. Dont wander far from the truck stop.
I wish my old radio peeps in Kalamazoo were still around.
I think it’s been cleaned up not as dangerous as the 90’s
 
  • Like
Reactions: Tokin
Who did you speak to in Kalamzoo Michigan I used to speak to lots up there also
Thats where I got into radio in the late 1980's. I knew the whole ch17 crowd, Redbone, Eastside Mikey, Triple K, Short Dick, Snowflake, Rodney and a bunch that dont come to mind since its been a long time.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated