are these radios good radios ? is there any tweaks i should know about ? or known problems with this radio ? i picked one up for $220 and it seems to work.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Kenwood TS450S
- Thread starter CrazyD
- Start date
Was a great radio when it was introduced decades ago. This many years later, the mileage matters a lot. If it was treated well, might serve a long time. And if it was mistreated, not so much.
Then again, I had an experience a few years ago with a guy who had a reputation for shutting down a channel for days at a time. His radio had a burned wire leading to the center pin of the antenna socket. The circuit board where it attached had visible heat issues, but the expensive stuff was okay. No problem with the final or driver transistors once the mechanical faults were fixed.
Gave the impression of a tough radio to kill.
73
Then again, I had an experience a few years ago with a guy who had a reputation for shutting down a channel for days at a time. His radio had a burned wire leading to the center pin of the antenna socket. The circuit board where it attached had visible heat issues, but the expensive stuff was okay. No problem with the final or driver transistors once the mechanical faults were fixed.
Gave the impression of a tough radio to kill.
73
im going to use a SDR with it so i can use my PC i have a hackrf i think i can just use that by tapping into the IF this is fun then i can do digital modes too i think they call it a panadapter
BJ radionut
Supporting Member and 6m addict
Great Radio...had one for like 11 years...I had mine LOADED with INRAD RX Filters!!!
Extra 2.4kc/+2.8kc and 1.8kc SSB...plus 6.0kc Am filter...very greatly improved the receiver having the switchable filters. Had great "ears".
Sounded best with a studio desk mic... I used Audio Technica T1000 HE or the Heil Gold Elite...got great reports once I through the hand mic in the box!
International Radio ::... (inrad.net)
Extra 2.4kc/+2.8kc and 1.8kc SSB...plus 6.0kc Am filter...very greatly improved the receiver having the switchable filters. Had great "ears".
Sounded best with a studio desk mic... I used Audio Technica T1000 HE or the Heil Gold Elite...got great reports once I through the hand mic in the box!
International Radio ::... (inrad.net)
this radio is totally stock did not even have the Mars mod...i need to get my hands on some filters
BJ radionut
Supporting Member and 6m addict
The INRAD Filters are highly Superior to the Kenwood Filters...Yes they cost more, but having used both the dual 2.4kc Kenwood filters and then replacing with the INRAD Filters...the difference was very apparent IMHO...
I had almost as much in Filter costs than I did radio...I had $600 in the filters (Purchased NIB) was able to sell the Kenwood filters quickly and recover some of the cost!
With that filter package installed that rig had better "ears" than my TS-850 or the TS-940 (both stock) I had owned also...
Once I got the studio mic installed, TX audio wise nobody knew which rig I was on!
All the Best
Gary/W9FNB
I had almost as much in Filter costs than I did radio...I had $600 in the filters (Purchased NIB) was able to sell the Kenwood filters quickly and recover some of the cost!
With that filter package installed that rig had better "ears" than my TS-850 or the TS-940 (both stock) I had owned also...
Once I got the studio mic installed, TX audio wise nobody knew which rig I was on!
All the Best
Gary/W9FNB
BJ radionut
Supporting Member and 6m addict
OH yes ...The Memory battery MOD is a must do...!!!!
Help! I Just Got a TS-450/690. (qsl.net)
pi4oss.ham-radio.ch/Mods/All_KENWOOD_mods_from_mods_dk_in_ONE_file.pdf