Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Anytone at5555n2

S

Slim304

Member
Dec 31, 2019
26
6
13
31
Anyone use the TalkBack and sounds like the echo is on but it's not but your voice coming through the radio has echo is there a way to make it normal besides turning the talkback off?
 

Slim304 said:
Anyone use the TalkBack and sounds like the echo is on but it's not but your voice coming through the radio has echo is there a way to make it normal besides turning the talkback off?
Click to expand...
It's not the echo you're hearing, it's the delay in the noise reduction circuit. Turn off the NR and listen to it again.
 
  • Like
Reactions: Pez
Do you have another radio turned on in the shack, monitoring? We have had similar questions before, and in these cases it has ended up being only the TX and RX processing delays, causing the "echo" sound when monitoring your own audio with different RX sources.
These radios run the audio via DSP and therefor they have a small processing delay.
Turning the TalkBack volume down a bit should help.
 
Pez said:
Do you have another radio turned on in the shack, monitoring? We have had similar questions before, and in these cases it has ended up being only the TX and RX processing delays, causing the "echo" sound when monitoring your own audio with different RX sources.
These radios run the audio via DSP and therefor they have a small processing delay.
Turning the TalkBack volume down a bit will help.
Click to expand...
No I don't
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ 357:
    holy man no activity or what?
  • dxBot:
    357 has left the room.
  • @ Hambones amps:
    Does anyone know if you can replace the 2290 in a galaxy dx 93t twin turbine with a 2sc2879 red dot? If so, what would have to be tuned?


      Top Bottom