• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Cobra 148 gtl rx/tx ok but hissing noise on background

manuelflo

New Member
Dec 14, 2024
1
0
1
65
Cobra 148 gtl rx/tx ok but problem is a constant tone noise on background with rf control down . Volume control can control constant tone noise. Sqwelch cut tone noise... mic ok. Only happens on ssb am ok. Thanks in advance for any help
 

so nobody replied here to this one. ? ? ?

are you new to SSB mode?

go to ch. 38 LSB during the day, and are
you hearing the madness there?
test your receiver there.

some hiss is normal in SSB receive.

what version 148 radio do you have?
the tag on the back of radio.?

Red China, Free China, Flip, made?
 
constant tone noise
When I see the word "tone" I think a musical note, like from a flute or a guitar string. I think what you meant was a hiss, like the sound of compressed air coming from a leaky hose.

The "hiss" will always be louder on sideband modes USB and LSB, fainter on AM when the antenna is not connected. The difference is not so much when the antenna is connected.

73
 
  • Like
Reactions: doffo

dxChat
Help Users
  • No one is chatting at the moment.
  • @ Hambones amps:
    Does anyone know if you can replace the 2290 in a galaxy dx 93t twin turbine with a 2sc2879 red dot? If so, what would have to be tuned?
  • @ ShadowDelaware:
    Hambones the entire amp section would have to be retuned, and the rf transformers re wrapped.