• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Lower Matching Section after final assembly - right

Lower Matching Section after final assembly - right

  • 0
  • 0
Lower Matching Section after final assembly - left

Lower Matching Section after final assembly - left

  • 0
  • 1
Upper Matching Section after bending

Upper Matching Section after bending

  • 0
  • 1
Detail of Lower Matching Section ready for Mounting

Detail of Lower Matching Section ready for Mounting

  • 0
  • 0
Lower Matching Section Wire with Ring Terminal and Heat Shrink

Lower Matching Section Wire with Ring Terminal and Heat Shrink

  • 0
  • 0
Soft Copper Tubing Ready for bending

Soft Copper Tubing Ready for bending

  • 0
  • 0
Soft Copper Tubing After Riveting

Soft Copper Tubing After Riveting

  • 0
  • 0
Mounting Flat Should be 1/2" in length and Soft Copper Tubing Main Length should be 42"

Mounting Flat Should be 1/2" in length and Soft Copper Tubing Main Length should be 42"

  • 0
  • 0
Flat area bent into Soft Copper Tubing and ready for 1/8" Hole to be drilled for Aluminum Rivet

Flat area bent into Soft Copper Tubing and ready for 1/8" Hole to be drilled for Aluminum Rivet

  • 0
  • 0
Soft Copper Tubing for Upper Matching Unit Bent over for mounting

Soft Copper Tubing for Upper Matching Unit Bent over for mounting

  • 0
  • 0
1/8" Holes drilled for Upper Matching unit

1/8" Holes drilled for Upper Matching unit

  • 0
  • 0
SO-239 Connection Riveted onto the Milford Hanger

SO-239 Connection Riveted onto the Milford Hanger

  • 0
  • 0
5" Wire Soldered and Heat Shrunk onto SO-239 connection

5" Wire Soldered and Heat Shrunk onto SO-239 connection

  • 0
  • 0
Picture showing sections after soldering

Picture showing sections after soldering

  • 0
  • 0
Top and Bottom Sections Mated

Top and Bottom Sections Mated

  • 0
  • 0
Picture showing alignment of antenna sections

Picture showing alignment of antenna sections

  • 0
  • 0
How the spacing blocks were held in place

How the spacing blocks were held in place

  • 0
  • 0
Bottom Antenna Section with Wooden Blocks in place to maintain 2" Spacing between elements

Bottom Antenna Section with Wooden Blocks in place to maintain 2" Spacing between elements

  • 0
  • 0
Lower Matching Section In place for reference

Lower Matching Section In place for reference

  • 0
  • 0
Bottom Mounting Section

Bottom Mounting Section

  • 0
  • 0
Tee Section Soldered

Tee Section Soldered

  • 0
  • 0
Top Cap Soldered on

Top Cap Soldered on

  • 0
  • 0
Upper and Lower Antenna Sections Mated by the Female Coupler

Upper and Lower Antenna Sections Mated by the Female Coupler

  • 0
  • 0
Antenna sections cleaned up and ready for soldering

Antenna sections cleaned up and ready for soldering

  • 0
  • 0
P

2011 Spring Giveaway Contest Entry - Cactus Super J-Pole 2 Meter - 70cm Antenna

Photos of the Cactus Super J-Pole Antenna I built for the 2011 Spring Giveaway Contest
Click to expand...
There are no comments to display.

Album information

Album owner
Peter Walker
Date created
Item count
31
View count
7,300
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

P

Peter Walker

Media items
31
Albums
1
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top Bottom
Back