• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • A Winner has been chosen for the 2026 July 4th Retevis RA89R Giveaway! Click Here to see who won!

Recent content by ahasverus

  1. A

    rigblaster

    dear ham i took the manual and saw i didn' realy good the hooking so i apology i do the job first thank you for your attention on3bm
  2. A

    rigblaster

    dear hams i use a rigblaster advantage tx yaesu1200 (in settings :no radio ) ft-8 14074 usb wjtx settings must be ok ( ports /power to pc usb )as i can send but no way to receive one single station like very much to know why and to let me see the light is there a connection i do wrong ...
  3. A

    wsjtx

    using wsjtx receiving always the SAME call in ft-8 (is is like this call is in a loop ) no other call appear connecting this call no problem thank you for help reinstall wsjtx same problem
  4. A

    scu-17

    tnx for reply ptt on the mic swr :1.0 14.074 still looking why wsftp ft-8 too high
  5. A

    scu-17

    dear sir i have no output ft8 when i increase the tx button on the scu-17 and became on the middle the swr on the yaesu dx1200 became too high and the tx switches off do you advice me to buy a new scu to resolve the problem or is something other i can do i use the wsjtx software...
  6. A

    hrd and psk

    radio yaesu ftdx10 sofware hrd de luxe see only letters /numbers in psk no text signal :22 is signal input to low ? can i increase / thank you for your attention and help 73
  7. A

    yaesu ftdx10

    i use the wsftp ft8 drivers ok comport7 codex reception ok cannot send rig and pc by cat cable usb a b can someone let me know the right SETTINGS thank you for attention and help on3bm settings rig usb -preset
  8. A

    qrz.com

    dear om in my page qrz.com https://www.qrz.com/db/ ON3BM there is a mail address not working contacted qrz.com reply it is on your settings i tried and verified the settings in google/ firefox/ edge no result i think the soft in qrz.com uses a script as i see no mailto in the source of...
  9. A

    wouxun kg-uv2d

    when i use ex freq 145.700 is it normal i don't see a 145.100 (rx/tx) do i use the menu 23 (off-set) menu 24 (shift direction) thank you for reply on3bm
  10. A

    daiwa switch mode power supply -fuse

    I opened the ss-330w to renew the fuse (220v-4A) but where can i find this fuse into the power supply. In the metal box where the power 220v enter ? otherwhere i see no fuse. Thank you for reply
  11. A

    tubes

    if someone needs info about tubes 1 to 368 let me know
  12. A

    hooking

    would a ham send me a sheme and which cables i need to hook a acom1000 with a arb704 and a yaesu1200 dx i should be much obliged thank you 73
  13. A

    wouxun kg-uv2d

    thank you for reply is this configuration right to hook the signaLink with the Wouwun i try to find the cable slcabhtw for the kg uv2d but i see only kguv1d could it be match thank you for reply
  14. A

    wouxun kg-uv2d

    is it possible to do ft-8 with wouxun kg-uv2d interface or others thank you
  15. A

    yaesu ftm6000e

    dear members like to know if the yaesu ftm6000e can be used with the scu-interface and pc for ft8-operation if so which cable do i need thank you for your attention and reply on3bm
See more
Top Bottom