Recent content by Antonios

It must be the same. As far I know, there is no big difference between A and AR models, especially having the same firmware loaded. ( Mine is v.1.3) Antonios

I only calibrated the output power to be exactly 50-20-5 watts on VHF-UHF bands, I checked the deviation and also the max available power on 222 MHz. I didn't try anything else, because it was no needed. You can try better. Antonios.

Hi all, Trying to find a way to set up my FTM-350R output power, after a replace of its VHF final, i figured out the way of reaching the service menu. Because i didn't find it somewhere in the internet before, i assumed it could be useful to some of you, providing the attached guides in pdf...

Moleculo et al: An other "different" mode of crossband: When FTM-350R recieves on a memorized VHF band (on left side) and transmits on UHF, if change the left side to another memory (broadcasting FM), it continues to crossband from VHF to UHF, having as a result to listen your favorite FM...

It is impossible to crossband 144 and 223 as FTM-350R uses the same final Rf circuit for both bands. It is the same when we try to crosband putting to both sides 440 Mhz.