You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
my Galaxy SSB Melaka has the 99 board in it it only put out 4 watts now it puts out close to 25 on am , we replace the 1969 final which was bad , now it really gets out ,
nah it ant his only choice , they make a noise device that goes in line or make a balin , i have made a balin and use pvc pipe zip ties and coax and put it in the line works great , all so make sure your coax isn't touching ant thing on the tv
ya need to check out what they have in mods for the 148gtl 5 pins same board , same mod s for modulation , ya can change a couple of diodes to up the modulation .
MODULATION: Remove R104 or TR32
AM POWER: VR6
SSB POWER: VR7
"RX" METER: VR1
"TX" METER: VR10
SQUELCH: VR2
TX FREQ.: VR3
CARRIER...
They say its finals have given out check all the diodes and little parts on the board also may have a loss solder joint , to found if you have one get a plastic end screw driver , and tap the bottom of the board while radio is on , and if you find one fix the joint .
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.