• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Recent content by EA3GEG

  1. E

    Elecraft K3 Review

    Thanks for the information and the link
  2. E

    Elecraft K3 Review

    Hi guys, i am using K3 utility with CW mode and I haven't any problem, but when I am going to use on RTTY mode don't transmiting and the K3 utility cann't decode. It's a configuration problem???? or it isn't posible RTTY from the K3 utility. Any idea Thanks Joan EA3GEG
  3. E

    Elecraft K3 ?????? Fact or Myth???????

    I have two tx/rx, the PROIII and K3, on CW mode I listen stations very weaks, howewer with the PROIII + roofing filter i can't lsten.On SSB mode the good diference is on the selectivity receiver, the K3 is better and the sensivity is similar. The K3 is not plug and play, it's need a good...
  4. E

    Double Bazooka and power

    Many thanks for answer, now I have the solution at the problem. The problem was with the watter and humidity into the conections and the conector SO.I dismounted and cleaned the RG 75 ohms, I did a new conections, used silicon and closed. Now I haven't problem when I am using a Acom amplifier...
  5. E

    Double Bazooka and power

    Hello, i have a bazooka antenna for 80 meters, with 80 watts it is not problem the SWR is 1:1,3, but when I load my Acom 1000, that`s imposible. I test the amplifier with a dummy mload and no problem. I am using a remot control antenna by ameritron RCS-10, I have changed 2 or 3 times the...
See more
Top Bottom
Back