• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!

Recent content by EduardoDX

  1. EduardoDX

    Ranger AR 3500 100w help

    Is D62 on the PCB.
  2. EduardoDX

    Ranger AR 3500 100w help

    D77 is correct in the schematic of this radio model however, it is labeled incorrectly in the PCB as D62. In this case, ensure D62 cathode is used for AM adjustment on T11 for maximum signal. Also TP1 TP2 and TP3 are labeled just as "TP" in in the PCB layout and the schematic. TP1 is located...
  3. EduardoDX

    Yaesu FT-891and Ham Radio Deluxe

    The RT software is good but to me, the only purpose is to back-up memory and menu values. Nothing else. I fully control my FT-891 remotely including voice TX audio via the LAN and the visual aid of a webcam facing the radio. HRD does a good job when paired with RemAud server and client software...
  4. EduardoDX

    Yaesu FT-891and Ham Radio Deluxe

    Cable recommended by HRD support (gold plated and with ferrite) made no difference. Issue persists. Upon checking with a tech from Yaesu, HRD asked me to re-flash my FT-891 with the latest firmware. I noticed my radio Main and DSP firmwares were dated 2021. At this time (July 2023) Yaesu has a...
  5. EduardoDX

    Yaesu FT-891and Ham Radio Deluxe

    The only workaround I found to switch the FT-891 to LSB where the default BFO is USB is by creating a CAT command in the Macros section of HRD. Natively it seems HRD was not setup correctly for the FT-891. The CAT command is simple (this is a manual workaround, not a fix): For LSB use the...
See more
Top Bottom