Recent content by Hoosier 789

If you can find a Siltronix Mod. 90 VFO with the number 3 on the back and the book that goes with it, it gives the hookup wiring for that VFO and the radio. I have seen the book listed on EBay for about $10.00. Finding the VFO might be Harder tho. I think the guy that sells the book also has...

One thing to remember is that all the aluminum is anodized which is a anti-oxidizing treatment like zinc coating on steel. You want to be careful on using any kind of abrasive or rubbing too hard on the alum., as you will remove the shinny coating from the alum. use a non abrasive alum cleaner...

Antenna Building - Beam You can go to Maco's web site and download all the assy. instructions for all their beams free, and then you can pick the one you want to build. you can buy the gamma Match, or you can make your own, or you can look around the web for different matching devices to buy...

General Class Ticket Here. Hoosier

FCC out of Touch One thing to consider is the fact that all countries Do Not use the same frequencies for CB that we do. If you could find the Freq. allocations dictated by the ITU, You would find that some of the so called "Free Band" areas are used by other entities in other countries. Just...

The only one here in the US, is in the LA area of California. The address is: Vertex Standard USA, Attn: Amateur Repair, 10900 Walker St., Cypress, Ca. 90630 Tel No. 714-827-7600. Hope this helps Hoosier RCI 2990DX, Tram D201A, Yaesu 757gx, Maco v5000, 4el Yagi, Exp 14 triband Yagi, Yaesu...

I also have 4Trams, one D201, and 3 D201A's and one 201 that is strictly a parts radio for the other ones. Had them checked out and gone through by Maycom in Michigan. They did a good job on them. Had to replace a couple of parts and a few tubes, but thats all. They work great. Hoosier RCI...