• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Recent content by ixphant0mxi

  1. I

    Roger Beep hook up question

    red to 13.8 volts at on off black circut ground with audio pin or mic gain remove the transmit wire for mic plug solder to tx on beep wire green wire to where transmit wire was remove the recive wire from ,mic pin wire yellow wire there resolder the recive to rx on beep
  2. I

    test

    test test auddddddddddio teeeeeeeeeest! LoL :rolleyes:
  3. I

    cobra 139 xlr

    thanks guys but i found what i needed about 30 mins after posting this for some reason theres more info when you put in google radio shack rec 458 and found what i needed thanks again pete
  4. I

    help with upd858 chip

    i sure they didnt mess with pins 13-17-19-20,21 and 22? pin 19 should be soldered to ground for normal 1-40 channels 13 10 k drop 17 with 5 vdc adds 27.415 to 27.445 and with pin 19 unlocked and 5 vdc 27.815 to 27.845 with just pin 19 with the 5 vdc 27.455 to 27.805 with 5 vdc added to pin 20...
  5. I

    help with upd858 chip

    sure they didnt mess with pins 13-17-19-20,21 and 22? pin 19 should be soldered to ground for normal 1-40 channels 13 10 k drop 17 with 5 vdc adds 27.415 to 27.445 and with pin 19 unlocked and 5 vdc 27.815 to 27.845 with just pin 19 with the 5 vdc 27.455 to 27.805 with 5 vdc added to pin 20...
  6. I

    cobra 139 xlr

    hi guys ! i bought a virgin cobra 139xlr off ebay radio works super had few bugs to work out but all is super now clarifier unlocked now tuned up d-104 silver eagle desk mic wired years ago i had all the paper work for doing the d 858 chip sence then i have lost them what i need is a decent...
  7. I

    courier pll spartan!

    did you check the mic wiring? sounds like the audio wire is in the wrong place that radio should let you remove the mic and still listen to recive