You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The right replacement would be would be nte 236 or 2sc1969 or 2sc1307 or 2sc2312 this is the same as the newer uniden washington radio pcb is 385 i think nte 152 is a good replacement for the main regulator on the back right side the final is on the back towards the middle of the radio i would...
Update I was able to program them to grms and they work as a pair now and very well I might add I dont have the right charger for them so I was wondering what the proper voltage for the charger you have for yours is doctor
replacements
I think all of the ones I have are modulation meters but they are the same rating as the swr meter you would have to change the plate is all not to hard to do I did it to mine. I will look down stairs in a bit and get back to you I paid 80 for 4 of them so 20 bucks would work for...
any one ever had one this seem to be a good meter looks kinda like my pdc700 but has no modulation scale and has a swich on the back for pep or av rading and wow what a differance it makes is it worth keeping or should i ebay it off?
pdc600
As for the lights replace them all with white leds and you will be better of never have to do it agin they should last 20 years and as for the guy with the bad swr meter I may have a replacement but you could try to loosen the set screw in the front first you have to take the cover off...
I have these 2 jobcom 450 handheld radios there were used by an local company here with a repeater I think they dont mach up to each other I found some programing info on them but dont really understand it the radios say they work fro 450mhz to 470mhz so I think they would work on frs band...
the toy box
i tried using a pot before annd it didnt work this toy was set up to play out loud on a little 2 watt speaker that was built in to the thing i took it out of as far as making tho old mod meter out of the radio any idea hop to make this move with the audio out like adding a cap or...
i am building a home brew noise toy box my 2 questions are i have this old bull sh** detedtor thingy that i put in one before but i cant control the audio level out of it it was hooked to like a 1 or 2 wat 8 ohm speaker little tinny one in the bs detector how can i use this and control how much...
I know there are a few differant mods out there but i am looking for the one using a 6 position rotory swich with the 11.1125 crystal in place not the 11.32.58 i know it was in one of those master tune up mod books i think number 3 but not sure anyone have this if i cant find that one the one...
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.