• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Recent content by Kung Fu Panda

  1. K

    959 stuck on channel 33

    I put a whole other face on it ,counter ,channel selector the whole thing and does the same thing on that face. Looks to be stock. Was received like that.
  2. K

    959 stuck on channel 33

    It’s receiving and transmitting on 33 only no matter what channel it’s on.
  3. K

    959 stuck on channel 33

    Hello I have a 959 galaxy that’s stuck on channel 33. I tried a new front board that I had spare and same thing. Checked for cold solder joints anyone had this problem before.
  4. K

    Mirage 36HP2

    Mirage 36 have no volume for receive. PA works talkback works. Pot for vol is good. Checked several caps in the chain all test good. Anyone come across this problem yet. Same board as the galaxy 66v3 and others.
  5. K

    Longhorn N6 10K

    It’s usually marked on the board but I don’t see it.
  6. K

    Longhorn N6 10K

    Anyone find the spot on the board in the new longhorn to do the 10K Mod. It’s different than the X9. TIA
  7. K

    Magnum S3 no receive volume

    Thank you.
  8. K

    Magnum S3 no receive volume

    My other account got banned for some reason so I had to make that one.
  9. K

    Magnum S3 no receive volume

    Who’s the magnum expert here. S3 no receive volume. On off pot was bent so replaced it no change. Receive is working meters moving transmit is good talkback works and PA works. Checked for broken wires and cold or broken solder joints. Any ideas where to look next.
  10. K

    Roger Fart in a Cobra 1000GTL?

    Those look like franks boards. There is another way to stop the Roger silence I do it on the solder side. I’ll have to try your way.
  11. K

    New cobra 29 LX

    Anyone play with the new 29 LX. It’s all surface mount now. Seems to be a turd. Any mods on it out there I can’t seem to find anything.
  12. K

    Galaxy 73v

    Anyone know how to bypass the fixed switch on a 73v. The fixed-10k switch don’t work so I’m stuck with the three fixed channels only. Any help appreciated thanks.
  13. K

    4600 turbo transmit/ receive light orange

    Pulled tr32 and it came to life but light is still orange.
  14. K

    4600 turbo transmit/ receive light orange

    Am/pa switch working. No solder blobs comes the board with the magnifying glass. Something keeping it from fully going into transmit. ‍♂️
  15. K

    4600 turbo transmit/ receive light orange

    4600 turbo with the 2290’s receive is good,has dead key no modulation. The T/R light turns orange not red when keyed. I’ve checked tr38, mic IC, D77 etc. any ideas on problem appreciated.
See more
Top Bottom
Back