• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!

nomadradio's latest activity

  • nomadradio
    nomadradio replied to the thread Go Fund Me for Bob's CB Shop.
    Seems like the present takes up more and more of my time to cope with it. The future gets less and less attention, seems like. No...
  • nomadradio
    nomadradio replied to the thread Go Fund Me for Bob's CB Shop.
    Opened in 1969? Got me beat by six years. Has to be really old by now. I wish his comeback all the luck in the world. Personal...
  • nomadradio
    nomadradio replied to the thread Im back!.
    Cool! Welcome back. 73
  • nomadradio
    nomadradio reacted to hotrod's post in the thread Im back! with Like Like.
    Its been a while since I been on here. But I have returned
  • nomadradio
    nomadradio replied to the thread Another Saturn bias issue.
    Gotta take one leg loose to check the bias diode. The circuit resistance in parallel is too low to obtain a meaningful test of the diode...
  • nomadradio
    nomadradio replied to the thread Problem with AL-80B.
    No, the solder adheres to a thin electroplated layer of nickel. The solid pin that comes through the glass is a tungsten alloy chosen to...
  • nomadradio
    nomadradio replied to the thread CPI 2000 issues.
    It should. For a while at least. It's kinda old, and may suffer from electrolytic cap disease if it has a lot of miles on it. Unless...
  • nomadradio
    nomadradio replied to the thread Another Saturn bias issue.
    Some final/driver transistors have that extra diode inside them. Some don't. After all these decades, I'm still waiting for a proper...
  • nomadradio
    nomadradio replied to the thread Problem with AL-80B.
    Have a close look at the filament pins. As in very-bright light and a magnifier. This is the pair of pins closest together. They carry...
  • nomadradio
    nomadradio replied to the thread M4000 Amplifier.
    It was when it was built. Might or might not be now. 73
  • nomadradio
    nomadradio replied to the thread Palomar 225 w/2 MRF 455's.
    That resistor is in series with the radio's drive power to the transistors. A pair of MRF455s only needs about ten or twelve watts peak...
  • nomadradio
    It's an AM-only linear that has a switch marked "SSB" on the front. It's not there because it's useable, it's there because buyers...
  • nomadradio
    nomadradio replied to the thread AL-811H problem/ question.
    Sure makes it sound like there's a 'glitch' resistor that's popped in line with the HV to the anode choke. A DC meter that can safely...
  • nomadradio
    nomadradio replied to the thread CPI 2000 issues.
    A 'scope is just a voltmeter with a dot in place of a meter needle. Positive voltage and the dot moves up. Negative input to the...
  • nomadradio
    nomadradio replied to the thread Yaesu FT-101E repair.
    The smaller, burnt resistor is R5, a 5.1k 5 Watt resistor. It's in series with the 12BY7 driver tube's screen grid. When R5 goes open...