• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

sunbulls's latest activity

  • sunbulls
    sunbulls replied to the thread RCA CO-PILOT 14T305.
    I go all out on any 02A Cybernet, but that’s just me. The two push buttons would be mounted below the MOD indicator. The RF gain would...
  • sunbulls
    sunbulls reacted to doffo's post in the thread RCA CO-PILOT 14T305 with Like Like.
    I would convert it to a 4 pin, then put some push buttons on front for the up/down fuction. :) But that is too much trouble.. :P I...
  • sunbulls
    After almost 20 years the time has come to say goodbye to the cbradiomagazine.com website as the website was quite large and the hosting...
  • sunbulls
    sunbulls replied to the thread Sears SSB Power Connector.
    I salvaged the male plug from an old ATX computer power supply. Those were ideal. After a little internal connection mod and chassis...
  • sunbulls
    I was surprised to see the 23 channel SSB Realistic TRC-48 in this 1974 Peter Fonda movie. I very capable radio indeed. Apparently...
    • Dirty Mary Crazy Larry.JPG
  • sunbulls
    sunbulls replied to the thread unidentified module.
    Hitachi only manufactured a few AM only CB radios, it’s sad they decided to abruptly quit their CB Manufacturing line. It’s like Hitachi...
  • sunbulls
    sunbulls reacted to Smokinone's post in the thread unidentified module with Like Like.
    Thanks. I have 2 6241'a, they are both working so I don't think it came out of those if it is a 6241 module. I will open one up and have...
  • sunbulls
    sunbulls reacted to doffo's post in the thread unidentified module with Like Like.
    I was late to chime in, but yep.. Outta an old Sears Roadtalker SSB radio. ;) (The first Sears SSB radio, not the slant face.) There is...
  • sunbulls
    sunbulls replied to the thread unidentified module.
    More clues…. Thinking back, many J C Penny radios used those connectors, and the 681-6241 (981-8360) model employed those same two 12...
  • sunbulls
    sunbulls replied to the thread unidentified module.
    By looking at the CBC International crystal mixing chart, various 12 Mhz crystals will produce higher channels and above frequencies in...
  • sunbulls
    sunbulls replied to the thread Sams PhotoFacts Collection.
    This is my enhanced version of the Lafayette Dyna-Com 5 service manual with a separate schematic.
    • Lafayette Dyna-Com 5 schematic.JPG
  • sunbulls
    sunbulls replied to the thread Lafayette Dyna-com 23 schematic.
    Back in those days my transistor replacement part source almost totally relied on ECG or working pulls. ECG195A for F6 and ECG237 for...
  • sunbulls
    sunbulls replied to the thread Johnson messenger 123a?.
    You're correct about hooking up the power, but it looks like that radio was under water or experienced extremely high moisture at some...
  • sunbulls
    sunbulls reacted to brandon7861's post in the thread Johnson messenger 123a? with Like Like.
    I don't think you want to test it. The RF connector is shot and will present a mismatch even if the coax is attached. Chances are...
  • sunbulls
    sunbulls replied to the thread Lafayette Dyna-com 23 schematic.
    My enhanced version of the schematic plus service manual for the Lafayette Dyna-Com 23.
    • Lafayette Dyna-Com 23 schematic.JPG