Recent content by WK766

Three videos. first with interesting test, second what's inside etc, third I did make channel buttons to work on my CRT SS 9900 so far radio works fine after using for a month or so. I didn't have to rewire anything on it, when you buy this and plug it to CRT SS 9900 everything works besides...

very interesting topic. in this video Scott from minute 4 shows calibration of the s meter s1,S3,etc with I think signal generator. . 73 guys.

https://www.radioddity.com/en-gb/products/radioddity-qt60 Owners manual page 9. Press Menu then Mode you should enter weather channels. Link above has download link for manual and software to programm the radio etc. Have fun. 73

Cool. thanks for sharing. my radio is the same. if I go to Anza Borego desert in the middle of nowhere I got noise floor maybe S1 with max RFG. When I come back home I get noise floor between S4-5 plus every other channel noise from sollar systems. For me looks like radio is very sensitive...

can someone make video and show what noise 5555N II is and post the link in here. There is lot of talk but visual explanation would be greatly appreciated.

nope, NRC function button when activated won't change nrc mode I have to use up down switches to change nrc levels. Soon or later we will come up with the solution

interesting, I check that today. that would make sense. cool. let you know.

I have to look at the traces again. I think switches have one trace to the ground and that signal is used for channel change and when nrc is activated it uses same trace for NRC. If that's the case I can set nrc for level I like and then remove the leg from the board and add the resistors so the...

I did that with KPO microphone. I added switches to it and put those resistors for up,down channels. It was exactly as easy as you mentioned. switch is grounding signal when pressed and channel will change depends through which resistor we grounding the signal. Problem with Digimike is from...

I got CRT SS 9900 from Mike that was align by him and did connect Digimike with that radio ( same as 6666 with small difference), I made video what's inside and attached two links in my description, One from Scott's Radios and another from 390 Wagon Master showing some info about President...

Yes I can do that, I was trying to figure out if there is a way to lower volume of the beep with in the ING menu.

If anyone can figure out how to lover volume of the beep function let me know. Not sure if that is even possible with in ING menu.

Not the expert so don't crucify me guys, but this is how you have to look at this radio. Its built like a cellphone or computer board with SMD technology. Computer motherboard has a BIOS to run the board, and this radio has its firmware. Not knowing what each option does in the ING menu can make...

I couldn't explain this any better than you did. I run 5555 NII v1 in the house with NB when gardeners are showing up with blowers, hahah works awesome. I made video just for fun. When they're gone, NB is off so I don't get that bleeding from other stations. I have CRT SS9900 in the car and...