Sidebar Sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Cobra 2k / Shure 526T SII mic pinout please

El Kabong

El Kabong

Say what?
Apr 11, 2018
108
62
38
Lost Angeles, CA.
Hi. Would anyone please look in their notes to see what the mic cable colors to pins info is for a 5 pin 2000 GTL to a Shure 526T II mic. Purdy please.

I've looked around but found no mention.

Thanks.
 

The blue "power supply ground" goes to pin 4. This is the ground for transmit/receive switching only. The shield goes to pin 2, which is ground for audio only.

Pin 3 is receive, the black wire. Pin 5 is transmit, the red wire. Yellow is not used, and was only needed for older Johnson CB radios.

Pin 1 is audio, the center conductor of the shielded wire. Diagram says it's white.

Should work.

73
 
  • Like
Reactions: TheRATT
And seems like it did work! We'll know tomorrow when I can snag a new 9 volt battery. Right now it receives and transmits so that leads me to a big thank you for the help.
 
It worked. There was one tiny thread of ground wire that got soldered to the white wire thus grounding the audio. With some sleep and food i redid it all. Works peachy now. Not as bass heavy as I had heard but not bad.
 
  • Like
Reactions: TM86

dxChat
Help Users
  • No one is chatting at the moment.


      Top Bottom
      Back