Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Mosfets

1000020219.jpg

This is the new amp that has the 4 × ERF9530's in it. The one on top is the driver used to get the most out of the Rocket Box. They are on the market, too.
 
  • Like
Reactions: kopcicle and Eldorado828
kopcicle

Post in thread 'Back from the dead'

...okay , maybe I didn't . :-/

:NOTES
About my current gcode.
My process flips the article vertically on the way to the CNC. yours may not. As designed the bias circuitry should be in the upper left corner when translated to the board.
The code was created with jscut.org. I supplied the .bmp and .svg file if you need/want to play with it.The "full" file just removes the copper. The "cutout" file cuts the parts. The extra transformer end plate is just that , extra.

Your mileage and processes will, not may , vary. This is in no way a finished product. The end result may promote...
  • Like

Just a reference to MRF300 usage
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ 357:
    holy man no activity or what?
  • dxBot:
    357 has left the room.
  • @ Hambones amps:
    Does anyone know if you can replace the 2290 in a galaxy dx 93t twin turbine with a 2sc2879 red dot? If so, what would have to be tuned?


      Top Bottom